User manual

Transport and Navigation : Transport Tool
Page 53
frames for the optional video output. A zero value indicates a correct setting of Disk Cache and Playback Buff-
ers.
2. Current TimeCode position. Can also be used as a locator by double-clicking in the field, editing the existing
or typing a new TimeCode value and clicking outside the field or hitting Enter.
3. Transport Controls
• Rewind [Num 1]
•First press 400%
• Second press 1000%
• Third press 2000%
• Fourth press 5000%
• Fast Forward [Num 2]
•First press 400%
• Second press 1000%
• Third press 2000%
• Fourth press 5000%
• Stop [Num 0]
• Play Reverse [Ctrl + Enter or Ctrl + Space]
• Play Forward [Space (Toggles Play/Stop) or Num Enter (Toggles Play / Pause)]
• Pause [Num 3]
• Record [Decimal]
4. Transport Status and Speed
5. When the button is active the Transport will Loop between In and Out markers
6. Current Format and Frame rate
Note: Read Drop and Current FPS are useful diagnostic tools when trimming Disk Cache and
Playback Buffers.
Transport Tool
A VCR like Transport Tool is available from the Tool bar. It collates all the information and controls relating to Trans-
port, incoming TimeCode and Chasing.
Note that the Icon displayed on the Toolbar may differ since the last tool chosen from the drop-down list will be
displayed. Alternatively the Transport Tool can be accessed from:
User Interface > Toggle Transport Tool [T] or
Toolbar Transport Control Panel Icon