User manual

Transport and Navigation : Transport Control
Page 52
Locator Goto Tool
As an alternative to the main Locator panel VCube offers a more compact Tool :
Open the Locator Goto Tool either by choosing Locator > Goto Tool or [Num 6]
Locators can be selected in the list by clicking on them, by using the up and down cursor keys or by typing the
number. Double-clicking the Locator or hitting Enter locates the transport to the Locator position and closes the
Tool.
Transport Control
VCube features a range of Transport Control options including a Transport Toolbar and Transport Control Panel. Of
course, the Transport Commands are also available via remote controllers that support them.
Transport Control Bar
The Transport functions can be controlled with the mouse or keyboard locally.
1 2 3 4 5 6
From left to right:
1. Read Drop counts the number of missing frames during the preview. A zero value indicates that Playback
Buffer Setting is fine-tuned. This number is reset on every Stop/Play action in the Transport Bar.
Current FPS shows the current playback frame rate. If the CPU, hard drive, or network is overloaded, playback
screen refresh may slow down.
When a Video I/O plug-in is enabled a VOut value is also displayed. This displays the number of missing
Locator Goto Tool
transport Control Bar