User manual

Projects : Import
Page 39
MXF
MXF (Material eXchange Format).
The VCube MXF Module has full support (playback, render, record up to 30 fps) for:
• D10 / Sony IMX (MPEG-2 in SD format)
• MPEG-2-HD / Sony XDCAM HD (MPEG-2 in HD 1080i format)
• VC-3 / Avid DNxHD (in HD 1080i format)
• AVCIntra / Panasonic P2 (class 50 and 100)
For the latest MXF interchange information please see:
http://forum.merging.com/viewtopic.php?f=23&t=2094
MXF Configuration
To record or render an MPEG-2 flavour in MXF:
Select the Custom (Media Handler Specific) codec. This will automatically select the D-10 (Sony IMX) MPEG-2 fla-
vour for SD formats, and the MPEG2-HD (Sony XDCam-HD) for HD formats.
To record or render in VC-3 or AVC-Intra simply choose the codec in the codec list.
To record audio embedded in the MXF file:
Select MXF in the Audio tab
16-bit and 24-bit PCM formats are supported.
OMF
[Alt + O] File > Import > Composition (Create New)
[Shift + Alt + O] File > Import > Composition (Add to Existing)
Note: The Fx icon shows when an imported Clip has an effect. The color of the icon denotes
VCube treatment of the effect as above.
1. If the path to media is included in the Composition, VCube asks the user to specify a network location for
those Media Files: Workspace/OMFI Media Files/... or a specific user path. If OMF Media Files are on the local
storage, press Cancel when the dialog appears.
2. If the Media Files remain unlocatable, the VCube software looks for Media Files in the sub-folders of the Com-
position file location on the local storage.
(Yellow) The Clip is a rendered effect.
(Green) VCube can render the effect in realtime.
(Red) The VCube does not support the effect.