User manual

Quick Settings : Overview
Page 25
Quick Settings
Overview
In order to ensure that VCube is as versatile as possible there are a very large number of settings. To make it easier
to configure VCube for common formats there are two Quick Settings options.
These two dedicated Settings panels enable one click setting of the Video Input format, the Composition format,
the TimeCode frame rate and the Video Output format. When VCube is configured by using Quick Settings it
behaves like a VCR for the format selected. Quick Settings can also form a useful basis for more complex configura-
tions.
Using Quick Settings
Set Up
To set up VCube using Quick Settings:
•Open the relevant Quick Settings Page using :
Quick SD Settings for Standard Definition formats: Settings > Quick SD Settings [Alt+F5]
Quick HD Settings for High Definition formats: Settings > Quick HD Settings [Alt+F6]
• Ensure that the two or three Reference Sources are set appropriately.
•Click on the Apply button for the appropriate format.
• Verify in the Current Configuration section that the settings are as you desire
•Click on Close to finish and close the Page
Please see subsequent pages for screenshots and details.