User manual

Appendices : Basic VCube Operation
Page 226
Basic VCube Operation
This is a typical VCube set up:
• The network is used to synchronize VCube and Pyramix DAW. It's also used to transfer HD or SD material
on the VCube's local hard disk.
• A SD VCR is connected to the video input allowing SD capture.
• The graphic output is connected to an HD video projector allowing compressed HD to be displayed
(authorization key required) at full resolution.
Note: Due to the storage transfer speed limitation of the single SATA disk, only MJPEG 1/10 (90%
quality) compressed 2K HD can be used. You also need the 2K (for Composition) authorization
key. Uncompressed 2K HD can be converted to 1/10 compressed by VCube render feature.
HD Media Files can be used into a SD Composition without this authorization key.