User manual

User Interface : Timeline
Page 22
Use Composition frame rate When checked the time-base is the same as the Composition Frame Rate. When
unchecked the time-base can be selected from the drop-down list above.
First foot position The Time field enables an offset to be entered if required. For example when a 15
foot (10 second) leader starting at 01:00:00:00:00 precedes the first frame of
action and the first frame of action should show 0.00 Feet & frames at
01:00:10:00.00 TimeCode then enter an offset of 01:00:10:00:00
Reset
Reset Feet Every Hour When checked, the footage counter and footage ruler will return to 0.0 after every
hour. This is useful if there are several film reels in a composition with first frame of
picture of each reel at the beginning of each hour. E.g. reel one starts at
01:00:00:00:00, reel two at 02:00:00:00:00 and so on. Thus enabling each reel to
count from 0.00 feet.