User manual

Appendices : AJA Video Cards and Plugins
Page 178
Xena SD and Xena LS share the same LXXXena.dll plug-in.
Video Format switches the Xena SD card from NTSC to PAL. This format is also the output format for the Xena SD
video Output. The target VTR must be capable of recording in this format.
A warning message will be displayed on the Xena SD Output if the Composition format is different from the Xena
SD. (E.g. an HD Composition at 24fps progressive)
Audio Source can be analog, AES or SDI embedded.
Reference Source offers the choice of which source will be selected as reference. Free Run (internal), External (Gen-
lock) or Input 1 (video input) are possible.
During capture the reference source is toggled to the active video input.
Input Selection offers the choice of which source will be selected. Analog (Component / Composite) or SDI (digital)
Video Analog Input Format: Composite, S video, Component SMPTE, or Component Beta are possible.
Video Analog Output Format: Composite, Component SMPTE, or Component Beta are possible.
Audio Analog Output Level: Sets the analog audio level referring to the digital full scale 0 dB during playback.
External Status displays the video format of the incoming genlock signal.
SDI Input 1 Status displays the video format of the incoming digital video signal.
Analog Input Status displays the video format of the incoming analog video signal.
AJA Xena SD and Xena LS Plug-in