User manual

Conversion and Rendering : MXF
Page 153
MXF
VCube supports standard definition and high definition MXF formats for playback at NTSC or PAL frame rates.
SD Files must be encoded with UYVY, DV, DVCPro 50 (dv50), MJPEG, or D-10 (AKA Sony IMX) codecs.
HD files must be encoded with DVCPro 100 (dv10), VC-3 (aka AVID DNxHD), AVC-Intra (aka Panasonic P2), or
MPEG2-HD (aka Sony XDCAM-HD) codecs.
VCube can render or wrap MXF files using all the supported codecs listed above. Due to real-time constraints,
Record is not available for AVC-Intra.
To render [Ctrl + R] an MXF file in VCube:
• Select MXF as the File Format for both video and audio.
• Select one of the available codecs for video Compression. For Sony XDCAM or XDCAM-HD, Advanced Set-
tings will enable you to select the flavour of MPEG-2 and the bit rate.
• Audio settings are available via the Advanced Settings dialog box.
Note: VCube can record both video and audio multiplexed in a single MXF file when MXF is
selected as the File Format for both Video and Audio.
MPEG
VCube uses the Mainconcept MPEG Encoder. Please see: MPEG Settings (MainConcept Encoder) on
page 209