User manual

Remote Control : VCube Chasing Pyramix Using Virtual Transport Via Network
Page 131
3. Open the Format & Sync Tab on the VCube workstation :
Follow VT Checked
VCube as VT “Clock Master” Checked
4. Open Settings > All Settings : Remote Control > Virtual Transport
5. In the General section:
Enable Virtual Transport Communication Checked
Automatically Set as Clock Master Checked
Automatically Set as TimeCode master Checked
6. In the Chasing Section
Force TimeCode Source to External / Virtual Transport Checked
7. In the Editing section
Synchronize Virtual Transport with Editing Moves
Note: For fuller information on using VCube, Pyramix and Virtual Transport together please refer
to the Pyramix User Manual and the Virtual Transport User Manual.
Virtual Transport Network Frame
Formats & Sync Tab - Synchronization section