User manual

Settings : Settings Page
Page 105
Page Flipping When checked can cancel split artefacts in slow progressive mode. Depending on the
model of graphic card, this function may or may not need to be enabled to allow correct
refresh of the Preview area. If split artefacts are evident try the opposite setting.
Size
Width Information only - Set in User Interface E.g. by Click and dragging Splitters.
Height Information only - Set in User Interface E.g. by Click and dragging Splitters.
Show Video Frame When checked a white hairline frame is shown around the edges of the selected scan for-
mat.
Show Safe Area When checked the standard cut off on a consumer display is shown as the outer dashed
box. The inner dashed box shows the Graphics safe area.
Floating Preview Size
The button checked determines the size of the Preview Window when in Floating Mode. ([F4] toggles.)
Double Size
Normal Size
Half Size
Quarter Size
Color
Color settings are only applied to the graphic card).They don't affect the AJA cards video output.
Default values are set by Double-clicking on the corresponding slider.
Brightness (IRE) Shows current Brightness Value
Contrast (IRE) Shows current Contrast value
Hue ( ) Shows current Hue value in degrees kelvin
Gamma Shows current Gamma value.
°