User manual

Settings : Settings Page
Page 102
Once the plug-in has been selected it must be enabled in order to make it available for the VCube software.
Please see: AJA Video Cards and Plugins on page 176 for detailed information about the various qualified
Video Cards and plugins.
Overlay
Timecode
Enable When checked a TimeCode counter is inserted into the overlay and Video output.
External Timecode When checked the TimeCode Counter displays the incoming TimeCode. This feature is
useful with a 24fps Composition synchronized to an external 25 fps TimeCode. A . dot
precedes the TC counter when the source is external. [Alt + B]
Feet / Frames When checked the counter displays film Feet and Frames instead of TimeCode. Please
see: Film Footage Ruler on page 21 for details and settings.
Nominal TC Shows the current TimeCode display format allows when running at Nominal Play speed.
Click in the field to drop down the list of options :
• H / M / S Hours / Minutes / Seconds
• H / M / S / Frames Hours / Minutes / Seconds / Frames
• H / M / S / Samples Hours / Minutes / Seconds / Samples
• H / M / S / Frames / Hundredths of a frame Hours / Minutes / Seconds / Frames / Hundredths of a Frame
• H / M / S / Thousandths of a Second Hours / Minutes / Seconds / Frames / Thousandths of a Frame
Alternate TC Format Shows the current TimeCode display format when not running at Nominal Play speed:
Click in the field to drop down the list of options. (As for Nominal TC)
Overlay Tab page