User manual

Settings : Settings Page
Page 101
Synchronization VITC Generator
Enable When checked VCube generates VITC
Line 1 When checked VCube inserts VITC into the video line specified in the field. Click to select
values from 10 to 39
Line 2 When checked VCube inserts VITC into the video line specified in the field. Click to select
values from 10 to 39
Note: Lines 10 and 11 are often used for VITC. Alternative VITC codes are sometimes present on
different lines. E.g. original and run time.
Video I/O
VCube Players do not include a dedicated video card. The video is monitored via the graphics card on VGA or DVI
outputs.
VCube Recorders include a Video card. The video can be monitored in the same way as a Player and also from the
video card dedicated output(s).
Two different video cards can be installed in a single VCube machine, but only one can be used at a time.
HD VCube also supports SD video cards.
The plug-in corresponding to the video card installed must be chosen from the drop-down menu. Depending on
the optional hardware (if any) inside the VCube workstation any of a variety of Plug-ins will be shown here.
Video I/O Tab page