User manual

Settings : Settings Page
Page 100
Note: The Transport Panel [T] can also be used to select the TC Source for Chasing and to enable
the Chase function.
Midi Time Code Input When checked, Midi TimeCode (MTC) is active.
Settings Opens the Midi Port Selection dialog:
1. Ethernet MIDI Current Midi Port. Click to drop-down a list of available ports.
LTC / VITC Settings
Synchronization - LTC Reader
Incoming LTC Information only
Synchronization - LTC Generator
Out Level Shows the current LTC output level. Click in the field to drop-down a list of output level
options between -24dB and +9dB plus off
Synchronization - VITC Reader
Incoming VITC Information only
Line 1 When checked VCube looks at the video line specified in the field. Click to select values
from 10 to 39
Line 2 When checked VCube looks at the video line specified in the field. Click to select values
from 10 to 39
Midi Port Selection dialog
LTC / VITC Settings