Installation guide

Merging Technologies
Le Verney 4, CH-1070 Puidoux Switzerland
www.merging.com/Pyramix T : [phone] • F : [phone]
• If they are moved between input strips, they are therefore scrolled along with input strips
in the main Mixer and are displayed on the first row section of the MeterBridge along with
input strips.
 MeterBridge Labels are now following the Strips and Busses colors, like the Routing Page.
Monitor Panel
The Monitoring Section has received a minimalistic revamp to be slightly aligned to the Mixing Console
New VS3 plug-ins available (from FLUX)
Those new VS3 plugins are available in 32bit & 64bit and require that you have the valid key
The Flux VS3 plugins come with a separate installer, a 32bit and a 64bit installer.
A detailed documentation of each plug-in can be found under C:\Program Files\Flux
 Elixir v3: Elixir is a novel kind of program limiter carefully designed to accomplish a truly natural
sounding result without changing the nature of the audio material and its timbre, presenting none,
or effectively reduced, conventional limiting “pumping” effects even during heavy processing.
 Epure v3: Epure is a state of the art five-band equalizer using a special state space based
implementation to ensure the best signal to noise ratio.
 Bitter Sweet v3: FREE / No key Requires.
Bitter Sweet Is a transient manager allowing to magnify or to lower a particular instrument in a
mix by increasing or decreasing transients of the complete signal.
 Syrah v3: Creative adaptive dynamics processor.
New generation dynamics processor utilizing real time dynamic detection and level dependent
processing, providing adaptive dynamic capabilities, which mean that Syrah is always trying to
adapt to the music and to the beat of the material.
Pure Series:
 Pure Compressor v3
 Pure DCompressor v3
 Pure DExpander v3
 Pure Expander v3
 Pure Limiter v3
 Solera v3
Note: More VS3 Flux plugins be ported to VS3 in a near future.
Warning: Pyramix v8.1 or v9 projects (32bit) that used the previous VS3 series (e.x. PureCompressor)
will not transfer their parameters to the new VS3 Flux v3 plugins series (e.x PureComp v3) which are
supported under 64bit, as those version are different. This means that users of such plugins have to
be careful if they open their 32bit projects under 64bit OS.
Mixdown Dialog ReVamp and new option:
Revamping of the Mixdown dialog window
 Mixdown media output file set up has a selector which comes with 3 options.
o Single Media
o One File per Track
o One file per Bus/Stem
 The Mix Source section provides the User the option to select which Mix Sources will be contained
in the Mixdown. Columns description.
o Bus section: Select the desired Bus source by double clicking its checkbox
o Channel Mapping: Change the Channel Mapping layout (applies mainly to Auxes & Surround
Buses). A dropdown menu will become available when a Channel Mapping is possible.
o Destination Track: User can decide where the Mixdown resulting file will be placed in their
Timeline. This feature replaces the “Place in Timeline” option (only available in Bus/Stem set
up mode).
 New channel mappings allowing no LFE (e.g. 5.0 mix from a 5.1 bus)
Loudness and True peak Limiting:
New options available in Mixdown dialog, which can be activated in order to apply loudness and true
peak limiting to your Mixdown.
 One file per Bus/Stem mode must be enabled
 Settings Option