User manual

User Manual : Beginning a New Project
User Manual
40
Step 3: Choose a Mixer
A new Project needs a properly configured Mixer. The Mixer, also called the Virtual Studio, is used to
route all signals into and out of Pyramix; it also determines the sample rate and synchronization source
for the Project.
Use Default Mixer
Loads the currently designated Default Mixer preset. N.B. The sampling rate of this preset takes prece-
dence over the sample rate set in the Editing Project selected in the Choose Project Type dialogue. If
no Default Mixer has been defined and Finish is clicked the Blank Mixer window opens. Please
see: Blank Mixer Dialog on page 43
Use a Preset
Choose one of the large number of supplied Mixer Presets (and User Presets if any have been created)
by clicking on its description. (The Use a Preset Radio button is automatically selected) Double-clicking
a Preset selects the preset and invokes the Finish function. I.e. opens the new Project with the selected
mixer.
New Project Wizard - Select a Mixer Preset dialog