User manual

User Manual : Strip and Bus Tools - Plug-ins
User Manual
208
De-Compress Switch
Switches the compressor between the compress and the de-compress modes.
In compressor mode, when the input level exceeds the threshold level, the gain is reduced according to
the setting of the ratio control. In de-compressor mode, when the input level exceeds the threshold
level, the gain is increased according to the setting of the ratio control.
Expander Section
Show/hide Expander section
Dynamics section on/off
Threshold Level Control
If the input signal level falls below the threshold level, the gain of the expander is reduced (or increased
in inverse mode) according to the setting of the ratio control.
Ratio control
Determines the proportion of gain reduction (or increase) for signals below the threshold level. If, for
example, the ratio is set to 2.00:1, in normal mode the output level will be decreased by 2 dB if the input
level is decreased by 1 dB below the threshold level.
Compressor and De-Compressor action
Threshold
Input level
Output level
Threshold
Input level
Output level
Compressor mode
De-compressor mode
Show/Hide Expander Section
Threshold Level Control
Expander Section On/Off
Ratio Control
Inverse Switch