User manual

User Manual : Tracks
User Manual
124
The Record icon has three possible states.
Record Safe and Record Ready are toggled by left-clicking the icon. AutoPunch Ready is enabled /
disabled by holding down the ALT key while left-clicking the icon.
Record Safe - no recording possible.
Record Ready - Recording commences when the transport Master Record button is pressed
and finishes either when the Stop button is pressed, or when the Play button is pressed.
Autopunch Ready - Recording commences when the previously set Record In point is
reached and finishes when the previously set Record Out point is reached.
Right Clicking the icon opens the Record Tab page of the Project and Information Settings dialog
box.
The Monitor icon also has three possible states.
Note: These icons are only shown when both an input and output connected.
These are toggled by left clicking the icon.
Auto - monitoring switches the associated Mixer channel input automatically between input
and repro. Behavior depends on the Auto-monitoring setting on the Playback Tab page of the
General Settings dialog box. European Monitoring (All tracks turn to INPUT on stop) OR
US Monitoring (Only Record Ready tracks turn to INPUT on stop)
Repro - The associated Mixer channel is always fed from the track replay.
Input - The associated Mixer channel is always fed from the track’s selected Input source.
Input source - the number shows the selected record input. When this area shows a dash no
record input is selected. This can be also set directly in the Mixer Console window.
Hide Track - track is removed from view on the Timeline but continues to play or record. It can
be restored by opening the Tracks Tab in the Project management panel and toggling the
appropriate YES entry in the Hidden column off. All hidden tracks can be display again by
selecting the menu item View > Tracks > Show all Tracks
The Waveform icon has three possible states.
Display Waveform - by default shows clips as blue blocks with yellow waveform superim-
posed.
Display Blocks - by default shows clips as blue blocks