User manual

User Manual : Project Information & Settings
User Manual
110
them when you want to output them. If this item is not checked, the new clips will be placed on the
track(s) set to record them.
Clean up Media after recording
Note: This option is automatically set OFF when a Project is opened.
This mode makes Pyramix work like an analog or DASH multitrack. I.e. All punch-ins are highly
destructive !! With modern, large hard drives, we would rather recommend:
View > Used Media > Invert selection > Delete media (after a good archive/consolidate/back-up
has been made) or:
b) Project > clean-up media, etc.
All these functions destroy media on the hard drive, but b & c offer more control over what is perma-
nently deleted.
Group Recorded Clips
When checked, clips in a multi-track recording are automatically grouped.
Auto Cross-fade
When checked a cross-fade is automatically applied when punching in or out. The current fade shape is
displayed form the choice available in the drop-down list (Power, Linear, dB, Cosine or Root-Cosine)
Duration can be set in frames, samples or milliseconds depending on which box is selected.
Playlists
These buttons toggle between three possible choices:
Don’t create Playlist
Create an empty Playlist for each recording
Create a copy Playlist for each recording
Note: Please see: Playlists on page 154