Specifications

Note that when audio channels are grouped, the settings of the first audio channel (Channel 5 in group 2 in the previous

example) are applied to channels featuring in the group (Channels 5 & 6 in the example)

Be aware that the morphing function between different presets is also applied to this setup section.

Note also that MS encoders/decoders use odd internal channels for Mono and even internal channels for Side.

Groups (18)

A group of audio channels can be selected with those buttons. Any action on the EQ settings is applied to the grouped

internal channels. By default only the group 1 gathering every available channel is created when loading the Epure Plug-in.

Right-clicking on the display area allows to copy in a single click the settings of the displayed group from another.

Here, the behavior of the vertical scale can also be selected. Auto, 6 dB, 12 dB and 24 dB are the possible choices.

Lowest Frequency to display (19)

Those buttons select the lowest displayed frequency. When 20 Hz is engaged, Epure displays the frequency range from

20Hz to 1/2 sampling rate.

Copy A & Copy B (11) The current parameters of a section are copied to the other one. The section A or B is re-initialized

with the current values and the morphing slider is parked at 100% of the corresponding section.

5.1 Epure II