Specifications

Default Value: Off

The inputs are directly routed to the outputs.

Graphic Display (2)

A graphic editing is also available from the graphic curve display.

Band Activation (3)

Default Value: On

Filter Type (4)

Default Value: peak

• 12 dB per octave high pass filter

• Low shelving

• Parametric

• High shelving

• 12 dB per octave low pass filter

Are possible for every band

Band Gain (5)

Unit: dB - Value Range: -24 / +24 - Step: 0.01

Default Value: 0 dB

Sets the gain for the selected band.

Band Frequency (6)

Unit: Hz - Value Range: 5 / 22K

Default Value: 50 / 200 / 500 / 2000 - Step: variable

Sets the center frequency for the band.

Band Q-Factor (7)

Value Range: 1 / 100- Step: 0.22

Default Value: 10

Sets the quality factor of the selected band if the filter type is parametric.

The effective Q-Factor depends on the applied gain. The displayed value corresponds to the maximum gain variation (24

dB).

Example: For a 6 dB gain, the max Q-factor isn't 100 as displayed, but is only 10 in a regular expression of this Q-factor. The

narrowest Q is 1/7 octave for 100 displayed value and the widest one is 6.67 octave.

5.1 Epure II