Specifications

4 Dynamic Processors

The Flux:: Dynamic Processor family features "Alchemist", "Solera", "Pure Compressor", "Pure Expander", "Pure

DCompressor", "Pure DExpander" and "Pure Limiter".

All the Flux dynamic processors rely on the level (peak and RMS) detection like products from other companies. But all our

algorithms also use a dynamic value extracted from the input signal. This measurement of the dynamic when combined the

usual electrical measurement of RMS and peak values, allows to deeply process the sound while keeping a natural

character. The Flux processors feature many unusual parameters such as "Angel's Share" and "Hysteresis" which use the

measured dynamic value to adjust respectively ratio and threshold. Since a drum track has a totally different dynamic range

than a complete mix, many "Dynamic Profiles" can be selected depending of the audio material to process.

Here are some of the key features that make our plug-ins the best available for dynamic processing in the digital domain:

• An analog like metering. RMS values are more useful than dB-fs peak meter when setting a dynamic processor.

• The "Angel's Share" parameter takes into account the signal for intelligent relaxation of the compressor action.

• The "Hysteresis" parameter allows compressing and de-compressing, independently of the sound level and can be mixed

with the standard compression scheme

• The Auto Release features a unique algorithm that avoids typical pumping effect.

• The Advanced Release allows to set a minimum and a maximum release values including a speed control for the release

value variation.

• A delay line can be inserted in the signal path to produce a null attack time.

• 64 bit internal floating point processing.

• Sampling rate up to 384 KHz, DXD.

• Up to 8 channels.

• The A/B Compare and Morphing section enables ultra fast and precise operations.

By combining innovative features, the Flux dynamic processors are capable of emulating vintage equipment and creating

distinctive new sounds.