Specifications

Unit: dB - Value Range: 0 to +12
Default Value: 0
Sets the smoothness of the transmission curve for the specific dynamic processing section. The curve is smoothed around
the threshold value of the dB amount set with the knee value.
Peak Detection Amount (29)
Unit: % - Value Range: 0 / 100 - Step: 1
Default Value: 0 %
Instant peak value can be added to the RMS signal feeding the detector section, making the dynamic processing more
sensitive to audio transients.
Angel's Share (30)
Unit: % - Value Range: 0 / 100 - Step: 1
Default Value: 0 %
This setting relaxes the ratio applied to the processor section when the detected signal dynamic raises.
Angel's Share Inverter (31)
When engaged, the behavior of the Angel's Share is inverted. The ratio value is increased depending of the detected signal
dynamic.
Hysteresis (32)
Unit: % - Value Range: 0 / 100 - Step: 1
Default Value: 0 %
Allows process the audio signal independently of the sound level but regarding the signal dynamic range. It is mixed with the
standard de-compression scheme.
Hysteresis Threshold (33)
Sets the gain range of the hysteresis parameter.
• Up: Increasing of the Hysteresis action
• Down: Decreasing of the Hysteresis action
The current Hysteresis Threshold value is reflected by two green lines on the Dynamic Activity display.
The hysteresis action is effective only when the orange Dynamic Activity (41) exceeds the area between the two green lines.
Hysteresis Maximum (34)
When engaged, the threshold for the processing is determined by the maximum values from RMS/peak detection OR from
the signal dynamic detection. The Hysteresis Threshold is still active, but the Hysteresis mix button is disabled.
This feature allows the whole process to be more reactive to the signal content. It worth to be tried on drum tracks.
4.4 Pure Series II Pure DCompressor II
70
4