Specifications

Level difference between in and out (40)
Vu-meter not peak-meter, referenced to -16 dB Fs by default. The scale is +/- 12 dB.
This is the compression, decompression, expander and de-expander summing envelop which also takes account of the input
and output gains of the band.
Dynamic Activity Display (41)
No scale
The current Hysteresis Threshold value is reflected by two green lines on the Dynamic Activity display.
The hysteresis action is effective only when the orange Dynamic Activity (41) exceeds the area between the two green lines.
Instant Release Value (42)
Auto Scale depending of the release value(s)
Preset Management:
Save (43)
Save replaces the selected preset by a new one under the same name featuring the current settings. If you want to keep an
existing preset without your new modifications, just select an empty place into the preset list, enter a new name for this
modified preset featuring the current settings and press Save.
Recall (44)
Once a preset is selected from the preset list it must be explicitly loaded into section A or the section B by using the recall
button. A preset is effective only after it has been recalled.
Copy A / Copy B (45)
The current parameters of a section are copied to the other one. The section A or B is re-initialized with the current values
and the morphing slider is parked at 100% of the corresponding section.
Morphing Slider (46)
This horizontal slider has no unity nor specific value display. It allows to morph current settings between two loaded presets.
Double-click on one side of the slider area toggles between full A and full B settings.
The results of an in-between setting can be saved as a new preset.
A global preset including the two loaded presets and the morphing slider position can also be saved from preset
management window.
Automation Control of the Morphing Slider (47)
Default Value: Off
4.4 Pure Series II Pure Compressor II
52
4