Specifications

settings. Note that a graphic editing is also available from the graphic curve display.

Filter Type (42)

Default Value: peak

• 12 dB per octave high pass filter

• Low shelving

• Parametric

• High shelving

• 12 dB per octave low pass filter

Are possible for every band

Gain (43)

Unit: dB - Value Range: -24 / +24 - Step: 0.01

Default Value: 0

Sets the gain for the selected band.

Frequency (44)

Unit: Hz - Value Range: 5 / 22K - Step: variable

Default Value: 100 / 500 / 2000

Sets the center frequency for the selected band.

Q-Factor (45)

Value Range: 1 / 100 - Step: 0.22

Default Value: 10

Sets the quality factor of the selected band if the filter type is parametric.

Preset Management

Preset Manager Access (56)

Loaded Preset Preset Display (57)

Save (58)

Save replaces the selected preset by a new one under the same name featuring the current settings. If you want to keep an

existing preset without your new modifications, just select an empty place into the preset list, enter a new name for this

modified preset featuring the current settings and press Save.

Recall (59)

4.3 Solera II Dynamic Processing Parameters Detailed