Specifications

The current Hysteresis Threshold value is reflected by two green lines on the Dynamic Activity display.

For Compressor and DCompressor sections, the hysteresis action is effective only when the orange Dynamic Activity (18)

exceeds the area between the two green lines.

For Expander and DExpander sections, the hysteresis action is effective only when the orange Dynamic Activity (18) stays

inside the area between the two green lines.

Hysteresis Maximum (27)

When engaged, the threshold for the processing is determined by the maximum values from RMS/peak detection OR from

the signal dynamic detection. The Hysteresis Threshold is still active, but the Hysteresis mix button is disabled.

This feature allows the whole process to be more reactive to the signal content. It worth to be tried on drum tracks.

Threshold (28)

Unit: dB - Value Range: -32 to +16 (Compressor/DCompressor) -80 to +16 (Expander/DExpander)

Default Value: 0

Sets the threshold of the specific dynamic processing section. This dB scale refers to an RMS value.

The threshold effective value is modified by the Hysteresis, the Hysteresis Threshold and, the Hysteresis Maximum settings.

Ratio (29)

Unit: dB - Value Range: 1 to 10 - Step: 0.01

Default Value: 1

Sets the ratio of the specific dynamic processing section.

The ratio effective value is modified by the Angel's Share amount.

Infinite (30)

Sets the ratio to its maximum possible value depending of the dynamic section

The DCcompressor section is limited 12 when this button is engaged.

Range (31)

Unit: dB - Value Range: 0 to 48/140/24/16 (Compressor/Expander/DCompressor/DExpander)

Default Value: 24/96/12/12

Sets the maximum allowed gain variation for a specific dynamic processing section.

Knee (32)

Unit: dB - Value Range: 0 / +24

Default Value: 0

Sets the smoothness of the transmission curve for the specific dynamic processing section. The curve is smoothed around

the threshold value of the dB amount set with the knee value.

Dynamic Section On/Off (33)

4.3 Solera II Dynamic Processing Parameters Detailed