Specifications

5.1.1 Special Cases

Some host applications may require a special configuration to support Flux products.

On Mac, Digital Performer 5 requires to limit the number of automation parameters. Epure has too much parameters and

needs the particular setting described below:

Only

• Bypass

• Morphing

• Gain, Frequency, Q and filter type for every band of settings groups 1 & 2

are automatable.

To achieve this particular configuration copy

defaults write com.gaelyvan.flux.Epure.au EpureSmallAutomationPublishForMotu -bool YES

and paste it in

Applications>utilities>terminal

then press Enter

If you need this configuration to be also applied to all VST and RTAS hosts, copy

defaults write com.gaelyvan.flux.Epure EpureSmallAutomationPublish -bool YES

and paste it in

Applications>utilities>terminal

then press Enter

Once done, the plug-in list of the host application must be refreshed.

To go back to the normal settings copy

defaults write com.gaelyvan.flux.Epure.au EpureSmallAutomationPublishForMotu -bool NO

defaults write com.gaelyvan.flux.Epure EpureSmallAutomationPublish -bool NO

and paste it in

Applications>utilities>terminal

then press Enter

5.1 Epure II Special Cases