User manual

www.merging.com/horus Page 51 - 54
Horus User Manual
7) Open the MTDiscovery tool, you should see a device called “Horus in Maintenance Mode”,
double click on it.
MT Discovery is installed with Pyramix v8. But it can also be downloaded from Horus
Standalone users at http://www.merging.com/horus/download
Note: If you do not see the Horus Maintenance Mode entry, try to reboot Horus in Maintenance mode
and verify your Horus Ethernet Connection to the MassCore GB Ethernet Card.
If you still do not see the Horus maintenance mode under MT Discovery. Open your Windows Device
Manager and go under NetWork Adapter. Disable and re-enable the Merging Technologies PCIe
Ethernet controller.
Warning: The Horus Maintenance mode is done in Auto IP config. So make sure that you are configured
to obtain an IP address automatically when performing a firmware update.
8) Your default web browser should open up on a firmware update page