User manual

www.merging.com/horus Page 37 - 54
Horus User Manual
Modules: A/D - AES Sub-Menu
Serial Number: This is the place you can access all your Modules serial
numbers without having to unslot them or open the box
Type: Module Type description
Input: Enabling Visible to Ravenna will allow Ravenna to “see” and use the I/O
Connections (seen under the Auto-Connect utility). Use the Auto-Connect
utility to activate the I/O stream connections
Output Source: Shortcut to the Output Source Routing Page configuration
Modules: D/A Sub-Menu
Output attenuation: Calibration of the D/A output (Range -6.0 dB to 0 dB).
Refer to the Hardware section for the D/A onboard output level calibration.
Serial Number: Module serial numbers
Type: Module Type description
Input: Enabling Visible to Ravenna will allow Ravenna to see and use the I/O
Connections (seen under the Auto-Connect utility). Use the Auto-Connect
utility to activate the I/O stream connections
Output Source: Visual indication of the current Output Source, selection the source will bring
you to the Routing Page configuration