User manual

www.merging.com/horus Page 32 - 54
Horus User Manual
All Active: Will select all 8 input channels for function and level grouping
Non-active: Users can adjust the input settings and level for the selected
channel only
Gain When in Mic, the input level range allows setting the Mic Preamplifier’s Gain
from -10.0 dB to +60.0 dB. In the range from -10 to 0 dB, a 10 dB Pad is
actually inserted.
When in Line, the input level range allows the Line Input Sensitivity to be
adjusted from +24 dBu down to + 4 dBu for 0 dBFS.
The – or + button enables dec/increments of 0.5 dB steps
Pading: a 10 dB Pad is automatically inserted in the Mic Preamp circuitry as
soon as the Gain is set to lower than 0 dB, without having to press a
dedicated Pad button. See the HORUS Web Control access under PreAmps
page for visual scaling details.
Mic or Line Switches the Input from the Mic-Pre amplifier to the line level circuitry. The
button will show the current input signal path it is set for (Mic or Line)
48V This button will turn on 48V phantom power for the channel. If it is lit, it
means that Phantom power is active. Only active on channels set to Mic.
Ø Phase invert button. When lit, this inverts the polarity of the considered input
signal.
80 Hz Low cut filter 80 Hz. Second order, 12 dB/octave.
Navigation Use the side left << and right >> arrows in order to navigate through banks of
8 inputs. Will only be active if more than one AD8(P) module is present in the
unit.
SETUP MENU
The Setup menu’s primary page contains function buttons described below as well as sub-menu links
listed in the sub-sections; Formats, Routing, Modules and Network.