User manual

www.merging.com/horus Page 29 - 54
Horus User Manual
Main Home Screen
This is the screen which you will see after the Horus completes its boot sequence. From here you can
get to all the other menus for the setup and use of the Horus. If at any time you want to return to the
Main Screen, you can press the Merging Logo in the bottom left-hand corner to come back out to the
Main Screen. The screen also has access to the 5 main sections of the Horus menu: Monitor,
Meters, IO & Sync, PreAmp and Setup.
Monitor Menu
The Monitor menu refers to the Horus front panel Headphones Monitor jacks. The Headphone jack
1&2 (6.3 mm and 3.5 mm) will output the same level and source.
Headphone gain: Sets the gain of the Headphone output. Use the slider (Left= less gain /
Right= more gain) or the + - buttons to set the gain to the desired level
Headphone level range: -60 dB to +12 dB
Headphone Mute: Mutes the headphone output when OFF is active
Output Source: Shortcut to the Output Source Page for the Monitor module (Described below
in “Modules Sub-Menus section”)