User manual

www.merging.com/horus Page 27 - 54
Horus User Manual
Horus Power On
Connecting the Power Cable
The Horus unit runs on 85-240 V, 50-60 Hz AC voltage. Excessive voltages can seriously damage the
Horus unit, so make sure that your AC power matches the voltage of your Horus unit. When you
connect the power use the cable you received together with your Horus unit and plug it into a
grounded outlet.
For safety and EMC reasons, and to prevent audio hum, the system must be properly grounded. If
your power source does not have a standard three-hole socket, the system must be grounded in
another appropriate manner.
If your Horus unit is equipped with the Redundant Power Supply option, make sure you connect both
mains cables (one to PRI and one to SEC mains plugs on the Horus).
1. Ignite the Horus Back Panel Power Switch
2. Press the Horus Front Panel Power Button
3. The Horus front panel button will turn blue. If the panel button light isn’t steady but appears to
flicker, this may indicate a faulty condition and requires immediate shut down.
4. Wait until the Horus is fully started and displaying the Main Home screen.