User manual


Horus User Manual

www.merging.com/horus Page 54
7) Open th
e MTDiscovery tool, you should see a device called “Horus in Maintenance Mode”, double-
8. But for Horus standalone users it can also be downloaded
from http://www.merging.com/horus/download
click on it.
MT Discovery is installed with Pyramix v
d verify your Horus
et Card.
If you still do not see the Horus maintenance mode under MT Discovery. Open your Windows Device Manager and look
in the NetWork Adapter section. Disable and re-enable the Merging Technologies PCIe Ethernet controller.
Warning: Horus Maintenance mode uses Auto IP config. Therefore en sure that you the PC is configured to obtain an IP
address automatically when performing a firmware update.
Note: If you do not see the Horus Maintenance Mode entry, reboot Horus in Maintenance mode an
Ethernet Connection to the MassCore GB Ethern
8) Your default web browser should open up on a firmware update page