User manual


Horus User Manual

www.merging.com/horus Page 44
HORUS WEB CONTROL ACCESS
Installing and accessing the Horus Control interface remotely
To control and view yo sure that you are using one of the Internet
zilla Firefox, Opera, Apple Safari.
ceed from step 2 to 3. If you have already installed a Pyramix v8 go
your system
load
ur Horus remotely with a web browser make
browsers below: Google Chrome, Mo
* Microsoft Internet Explorer is not yet supported *
Then take the following steps:
1) If you did not install Pyramix v8 pro
directly to step 4)
2) Download the MTDiscovery.exe application to
http://www.merging.com/horus/down
ured with the
ng up the Horus IP Address”)
ar in the folder
‐ A mouse doub orus Web Interface in your default
web browser
-click on the discovered device and select “Open” and the Horus Web Interface will
open in your default web browser.
* Microsoft Internet Explorer is not recommended for this*
Using
the
Webpage, you can browse the Menus and change parameters in exactly the same manner as on the front
panel TFT of the Horus unit in question.
3) Make sure your Horus is connected to the same network as your PC, and is config
correct IP settings (See “Setti
4) Launch the MT Discovery tool (MTDiscovery.exe)
Any Horus devices on the network will be discovered by the MT Discovery tool and will appe
tree under “Ravenna Devices>Horus Devices”
le-click on the Horus Device entry will open the H
‐ Alternatively, right
Figure 1 MT Discovery Window