User manual


Horus User Manual

www.merging.com/horus Page 35
Inactive: Ad
justments to the input settings and level affect only the selected channel
only
Gain er’s Gain to be
dB, a 10 dB Pad is
ine Input Sensitivity to be adjusted
ry as soon as
ated Pad button.
ps page for visual scaling details.
ic or Line uitry. The button
48V This button will turn on 48V phantom power for the channel. If it is lit, it means that
e on channels set to Mic.
lected input signal.
Low cut filter 80 Hz. Second order, 12 dB/octave.
>> arrows in order to navigate through the banks of 8
inputs. Will only be active if more than one AD8(P) module is present in the unit.
SETUP MENU
The Setup menu’s primary page contains function buttons described below as well as sub-menu links listed in
the sub-sections; Formats, Routing, Modules and Network.
When in Mic mode, the input level range enables the Mic Preamplifi
set anywhere from -10.0 dB to +60.0 dB. In the range from -10 to 0
inserted.
When in Line, the input level range enables the L
from +24 dBu down to + 4 dBu for 0 dBFS.
The + or - buttons give increments/decrements in 0.5 dB steps
Padding: a 10 dB Pad is automatically inserted in the Mic Preamp circuit
the Gain is set to lower than 0 dB, without having to press a dedic
See the HORUS Web Control access under PreAm
M Switches the Input from the Mic-Pre amplifier to the line level circ
will show the current input signal path it is set for (Mic or Line)
Phantom power is active. Only activ
Ø Phase invert button. When lit, this inverts the polarity of the se
80 Hz
Navigation Use the left << and right