User manual

Horus User Manual

www.merging.com/horus Page 32
Main Home Screen
This is the screen which you will see after the Horus completes its boot sequence. From here yo
to all the other menus for the setup and use of Horus. If at any time you want to return to th
u can navigate
e Main Screen, you
can press the Merging Logo in the bottom left-hand corner to return to the Main Screen. The screen also has
access to the 5 main sections of the Horus menu: Monitor, Meters, IO & Sync, PreAmp and Setup.
Monitor Menu
The Monitor menu refers to the Horus front panel Headphone Monitor jacks. The Headphone jacks 1 & 2 (6.3
mm and 3.5 mm) output the same source and level.
Headphone gain: Sets the gain of the Headphone output. Use the slider (Left= less gain / Right= more
gain) or the + - buttons to set the gain to the desired level
Headphone level range: -60 dB to +12 dB
Headphone Mute: Mutes the headphone output when OFF is active
Output Source: Shortcut to the Output Source Page for the Monitor module (Described below in
“Modules Sub-Menus section”)