User manual


Horus User Manual

www.merging.com/horus Page 30
HORUS POWER ON
age the Horus u
nit,
t the power, use
fety and EMC reasons, and to prevent audio hum, the system must be properly grounded. If your power
er appropriate
Redundant Power Supply option, make sure you connect both mains
cables (one to PRI and one to SEC mains plugs on the Horus).
1. Ignite the Horus Back Panel Power Switch
Connecting the Power Cable
The Horus unit runs on 85-240V, 50-60 Hz AC voltage. Excessive voltages can seriously dam
so make sure that your AC power matches the voltage of your Horus unit. When you connec
the cable you received with your Horus unit and plug it into a grounded outlet.
For sa
source does not have a standard three-prong socket, the system must be grounded in anoth
manner.
If your Horus unit is equipped with the
2. Press the Horus Front Panel Power Button
3. The Horus front panel button will turn blue. If the panel button light isn’t steady but appears to flicker, this
may indicate a fault condition and requires immediate shut down.
4. Wait until the Horus is fully started and displaying the Main Home screen.