User manual


Horus User Manual

www.merging.com/horus Page 25
Installing additional Horus MADI Extension Module (MADM or MADS)
Before you get started
ave plenty of room for
d in order to
it, you must use correctly shielded cables of
stalling the Horus unit. For the power connection, a
shielded power cable with a proper ground can be used.
Hardware Installation
unt the I/O
modules and the power, audio an tions that can be accessed on the rear panel.
UNIT IS SWITCHED OFF BEFORE ATTEMPTING TO CONNECT ANY
Installing Horus MADI Extension I/O procedure
The MADI extension packaging includes the MADI module along with; two BNC nuts, two spacers and two
screws.
-
Place the Horus unit on a hard and dry surface or mount it into a 19” rack and le
air convection.
- In order to meet the EMC requirements of directives 89/336/EEC and 93/68/EEC, an
obtain the high performance possible for the Horus un
good quality for all external connections when in
normal un
- Make sure that your sound system is at a safe volume level.
This section will take you through installation of your Horus unit. We will describe how to mo
d digital cable connec
*PLEASE ENSURE THAT YOUR HORUS
CABLES TO THE UNIT.*
1. Place the Horus unit on a dry steady horizontal surface. Remove all cables (including the power cable)
and unscrew the Horus top panel.
2. On the Back Panel unscrew the MADI cover plate above your current MADI 1 I/O Module
Unscrewed MADI cover plate