User manual


Horus User Manual

www.merging.com/horus Page 19
Connecting the AES
-EBU cable
hos to use, or have had made, conform to this specification before
you attempt to connect them.
The AES ports connect the AES-EBU I/O using DB25 D-SUB connections.
Please ensure that the cables you have c en
To connect th
r has mounting
screws on either side, then fasten th nce the cable has been pushed into place.
Note: The pinout of the DB-25 is as per Tascam Digital.
* THESE CONNECTIONS ARE NOT MEANT TO SUPPORT ANY SIGNIFICANT WEIGHT.*
Ensure that there is no strain from the connected cable as any significant pressure to the module’s DSUB connector could
damage the Horus unit.
e DSUB connection to the AES port, align the Male con
nector with the female DSUB port on the
module. Then, with slight pressure, guide the connector into place. If your DSUB connecto
em finger-tightn o