User manual



Horus User Manual



www.merging.com/horus Page 14

4. Set the DIP Switches as per the table legend printed on the DA8 module card

Output L l (dBu) eve

+24 +18 +15 +12

ON ON

2 ON ON

3 ON ON

Switch

S1 to S8

4 ON ON

Output Level calibration Example:

Assuming your operating Level is 21 dBu for 0 dBFS (typical of French Radio Broadcasters), you should set the

DIP Switches all OFF (DIP Switch positioned ft, with respect to the picture below) to set maximum

Output Level to +24 dBu (since there is no 21 dBu hardware setting)

to the le