User manual

www.merging.com/hapi Page 56
Hapi User Manual
Hapi Meters Web menu
Meters web menu
The Meters web menu will display the input metering of the modules present in the Hapi
Led indications:
Peak indication
Alignment range
Signal indicator
The leds indicate the inputs levels of the AD1 inputs 1 to 8
Note: You can reset a module Peak by doing Mouse + Click on the Module display section. In the
example above pressing A/D 1(8ch) will reset the peak displayed on the input 1.
Meters web Settings:
Hot: Sets the level above which the meter display will be red. If set to 0dB this will
mean clipping. Range -2dBFS to 0dBFS
Alignment: Sets metering level alignment range (yellow leds). Range -24dBFS to 0dB
Decay integration time: Sets the rate at which the level meter display decays after the level falls below
the most recent Peak.
Peak Hold: If ON it will keep the red Peak Hold Overload in display