User manual

www.merging.com/hapi Page 37
Hapi User Manual
Screen navigation
The Main Rotary Control gives the user control over the Hapi OLED screen navigation
The Rotary Control: The Rotary Control wheel when turned from right to left navigates
through the available menu, to confirm a Menu entry Push the Rotary
Control button. This will either open a sub-menu or confirm an entered
value.
The Main Rotary Control also gives the user control on the volume
level of the monitoring (Headphone or DA) or the gain level of a
selected Mic PreAmp channel.
Push: Pushing the Rotary button will confirm the menu entry selection or
confirm an entered value.
Long Push: In order to return to the previous screen keep the Rotary Control
pushed for 1 sec. Keeping the Rotary Control Pushed for a longer
period will bring you back to the Hapi Main Home screen
Main Home Screen
This is the screen which you will see after the Hapi completes its boot sequence. From here you can
navigate to all the other menus for the setup and use of Hapi. If at any time you want to return to the
Main Screen, you can press and hold the Main Rotary Control button for a second in order to return to
the Main Screen. The screen also has access to the 8 main sections of the Hapi menu: Volume,
Meters, I/O, PreAmp, Setup, Presets, Errors and Exit.