Setup guide
Table Of Contents
- Workstation Setup Guide
- Contents
- Before You Start
- Package Contents
- Site Preparation
- System Overview
- Assembling the System
- Index
?
46 • Workstation Setup Guide
Chapter 4 • Assembling the System
7. On both Avid MediaDock LVD #1 and #2, place the configuration
switches on the ESM and I/O modules into position 1.
Three-Enclosure
Configuration
The three-enclosure configuration uses two Avid MediaDock LVDs in single
bus configurations and one Avid MediaDock LVD in a dual bus configuration.
This configuration lets you use a maximum of twenty-four drives; twelve on
each SCSI bus.
Make sure you do not terminate the I/O modules with SCSI
terminators. The I/O and ESM modules have internal termination.
SCSI cable from channel 1/A
of the Adaptec controller to
Avid MediaDock LVD #1
SCSI cable from channel 2/B
of the Adaptec controller to
Avid MediaDock LVD #2
Avid|DS workstation
SCSI cable
SCSI cable
Avid MediaDock
LVD # 3