Setup guide

?
The Computer Monitors
Workstation Setup Guide • 39
The Computer Monitors
Your workstation comes with two 21-inch monitors for Avid|DS. Place the
monitors side-by-side in your work area. Each monitor comes with a DVI
cable and a power cable. For more information on the card and cables, refer to
the Wildcat 4210 and monitor documentation.
To connect the monitors
1. Verify that the power switches on the monitor(s) and the base unit are in
the Off position, and then connect these devices to a power source.
2. Attach each monitor’s video cable to the appropriate DVI connector as per
the illustration above.
On a rack mount workstation, the video ports are to the left when
viewing the back of the workstation base unit.
DVI connector for
right monitor
DVI connector for
left monitor
Only the DVI connectors of the Wildcat 4210 are used in Avid|DS.