User manual

12 DUA II User Manual © 2001 Merging Technologies
Stand Alone A/D and D/A Setup
This example is based on a stand-alone audio converter application.
This configuration allows having 4 ANALOG-to-AES/EBU and 4 AES/EBU-to-ANALOG converters.
MERGING DUA II
Audio Interface
AES-EBU
INPUTS
ADAT
ODI I/O
AES-EBU
OUTPUTS
ANALOG
OUTPUTS
ANALOG
INPUTS
Monitor
Outputs
4 Channels
Digital IN
4 Channels
Analog IN
Audio
Monitoring/
Headphones
4 Channels
Analog OUT
4 Channels
Digital OUT
This example uses the following:
• Analog line inputs 1-4 are internally routed to AES/EBU outputs 5-8.
• AES/EBU inputs 5-8 are internally routed to analog line outputs.
• The monitoring is provided by the front panel monitor selection of DUA II.
• The DIP switch 1-8 must be set to: X – X – X – X – ON – OFF – ON – OFF.