User manual

© 2001 Merging Technologies DUA II User Manual 11
Merging®|Pyramix 3.0 Workstation with Surround Monitoring Users
This example is based on a typical Pyramix analog/digital audio studio with both types of devices and a surround
monitoring system.
MYKERINOS
Card
MERGING Pyramix 3.0
Computer
MERGING DUA II
Audio Interface
AES-EBU
INPUTS
ADAT
ODI I/O
AES-EBU
OUTPUTS
ANALOG
OUTPUTS
ANALOG
INPUTS
Monitor
Outputs
DAT/
Effect
CD
Player
Mixer /
Mic. Preamp.
LCR
S
W
S
L
S
R
This example uses the following:
• Mic.Preamp./Mixer outputs are routed through analog inputs of DUA II to Pyramix input channels 1-4 (ADAT)
• DAT/Effect/CD-Player outputs are routed through AES/EBU inputs of DUA II to Pyramix input channels 5-8
(ADAT)
• Pyramix output channels 1-4 (ADAT) are routed through analog outputs of DUA II to the monitoring system.
(In this example: CH1 = Left / CH2 = Center / CH3 = Right / CH4 = Subwoofer)
• Pyramix output channels 5-6 (ADAT) are routed through monitor outputs of DUA II to the monitoring system.
(In this example: Left = Surround Left / Right = Surround Right)
• Pyramix output channels 7-8 (ADAT) are routed through AES/EBU outputs of DUA II to the DAT/Effect.
(In this example: It may be a simple Stereo Mix to be recorded on DAT, or a send for external effect)
• The DAT/Effect must be synchronized to its AES/EBU input.
• The DUA II is set to ODI sync mode, AutoDetec SR mode and OUT5/6 monitoring.
• The DIP switch 1-8 must be set to: X – X – X – X – OFF – ON – OFF – OFF.