Specifications

RAVENNA ASIO & Core Audio Guide
RAVENNA ASIO & Core Audio : Merging RAVENNA Easy Connect
9 - 42
Connection Status
Not connected
Connected correctly
Connection Error (see message displayed at bottom of Easy Connect window for details)
Partial connection
A Partial connection indicates that the connection to the MassCore, ASIO or Core Audio host cannot be made.
Please verify that the MassCore, ASIO or Core Audio host is available in the left-hand Easy Connect column. If it is
present select the problematic input or output and disconnect it, then reconnect it.
If the MassCore, ASIO or Core Audio host is not present please exit and restart the application.
Note: Each Input and Output module is in blocks of 8 channels (except for Monitoring
which is 2 channels)
Once connected the Inputs or Outputs will be available within the Pyramix Mixer for I/O connections.
Activated Connection Example
Once a RAVENNA connection has been enabled it will be made available in the Pyramix Mixer.
In the example below the AD1 input has been enabled:
TimeCode Connections
Note: With a Native system it is NOT possible to use Easy Connect to read TC from Horus.
In order to do so rtpMIDI must be used. A separate document is available detailing the
configuration of such a setup. Please contact Merging Technologies support for full
details:
[e-mail]
Easy Connect & Pyramix Connections