Specifications

RAVENNA ASIO & Core Audio Guide
RAVENNA ASIO & Core Audio : Horus Preamp Remote Control
5 - 33
Pro Tools on PC
Horus analog preamps can be controlled directly from within Avid Pro Tools running on a PC.
In order to set Pro Tools up for Horus preamp control follow this procedure:
1. Check the Horus firmware version and update if necessary to v19734 or above.
2. Connect Horus to the system running Pro Tools through the Ethernet. port.
3. Download rptMIDI from here:
http://www.tobias-erichsen.de/wp-content/uploads/2012/08/rtpMIDI_1_0_11_227.zip
4. Install rptMIDI
5. Start rptMIDI
6. In the My Sessions section (top left) click on the + button to add a new entry.
7. In the Session section (right) rename the entry in the Local name: field to HorusPre.
8. In the Directory section (bottom left) select the Horus_80xxx_midi_pre module entry to add it to the
Participants list.
9. At the top of the Session section check the Enabled box to enable the session.
10. Close the rptMIDI control panel.
11. Open the MTDiscovery application and check that the Horus is connected.
12. Please see: Within Pro Tools: on page 31 and follow step 10 and complete the subsequent steps in Pro
Tools followed by restarting Pro Tools.
rptMIDI control panel