Specifications

RAVENNA ASIO & Core Audio Guide
RAVENNA ASIO & Core Audio : Horus Preamp Remote Control
5 - 31
Within Pro Tools:
10. Launch Pro Tools and configure to work with RAVENNA Core Audio I/O.
11. Open Pro Tools Peripherals Settings.
12. In the Peripherals panel select the Mic Preamps tab and select in order: Pre, NtwrHP and Send to pre-
defined>network, HorusPre>Channel-1
Note:
•For the first AD module Receive From > Channel 1 and Send To Channel 1 must be set.
•For the first AD module Receive From > Channel 2 and Send To Channel 2 must be set.
•For the first AD module Receive From > Channel 3 and Send To Channel 3 must be set.
Note:
13. Click on OK and close the Peripherals panel.
Pro Tools peripherals Settings Mic Preamps tab