Specifications

RAVENNA ASIO & Core Audio Guide
RAVENNA ASIO & Core Audio : Merging RAVENNA Core Audio Driver (Mac)
4 - 29
Troubleshooting
Note: Sampling Rate changes must be made on the Horus. The DAW will follow the
Horus sampling rate.
RAVENNA Core Audio Settings
For proper driver functioning check that the RAVENNA Core Audio panel is showed with all LEDS showing green.
Note: When the interface is shown as available (yellow or green led), the system could
take some time to configure the interface (several seconds).
Buffer Size Recommendations
A buffer size of 128 samples is recommended.
Latency and Clicks
Audible pops and clicks can occur when using some third-party audio interfaces or depending on the speed of the
processor. To avoid this problem increase the Hardware Buffer size for the device. You should aim for the lowest
possible I/O buffer size value that doesn't introduce clicks, pops, and crackles in the audio.
Security Firewall
The Mac Firewall can block communication between RAVENNA and Horus.
Recommendation: Disable by switching it Off.
Mac Security panel - Firewall Tab