Specifications

RAVENNA ASIO & Core Audio Guide
RAVENNA ASIO & Core Audio : Merging RAVENNA ASIO Driver (PC)
3 - 12
• Status - State: Shows the connected ASIO Host or no ASIO Host connected
• Monitoring: - Opens up a panel used for debugging
8. Configure the application you wish to use (Pyramix or other DAW) so that the I/O connections use the Merg-
ing RAVENNA ASIO Driver
9. For Pyramix users the VS3 Control Panel must first be opened and the Merging RAVENNA ASIO driver
selected under I/O Selection -Driver name: .
10. Ensure that the Horus is connected to correct Gigabit Ethernet port and launch the DAW application.
Note: VS3 Control Panel Error. If you encounter an error such as: NIC Adapter not pres-
ent ensure that the Horus is NOT connected to the MassCore NET-MSC-GBEX1 Ethernet
interface card. (Not supported for RAVENNA ASIO.) The Horus should be connected to
the system gigabit Ethernet port selected in the RAVENNA ASIO Control Panel. Also
ensure that the VS3 Control Panel os configured to use ASIO.
VS3 Control Panel